Water softener tank and brine tank beside supply pipes in a garage

Water Softener Installation and Filtration in Inver Grove Heights, MN

The City of Inver Grove Heights lists its water at 20 to 22 grains of hardness. A properly sized softener protects pipes, fixtures and water heaters.

Water softener and filtration in Inver Grove Heights, MN

The City of Inver Grove Heights publishes its water hardness as 370 mg/L as calcium carbonate, or 20 to 22 grains. That is very hard water by any standard. It leaves white crust on faucets, spots on glassware, stiff laundry and scale inside water heaters and pipes.

A softener swaps calcium and magnesium for sodium or potassium in a resin tank and recharges with salt or potassium. Water softener installation in Inver Grove Heights is scheduled work, and we offer same-day appointments when available.

The city's own water page offers information for people setting up a softener in the city. Start there for the water numbers, then call us to size the unit.

What hard water does to a home

Scale builds on heating elements and tank floors, and it narrows pipes over years. Tankless heaters scale up fast. Faucet cartridges stiffen. Shower heads clog. Dishwashers and washing machines work harder and wear sooner.

A softener does not remove everything. It does not filter chlorine, bacteria or most chemicals. If taste or other contaminants are the concern, a carbon or reverse osmosis filter handles those.

The city says that its water comes from six municipal wells in the Jordan aquifer. It publishes a yearly water quality report. If you want to know about contaminants, read the report first.

Softener, filter or both

Choose the equipment based on the problem.

ProblemEquipmentNote
Scale, spots, stiff laundrySalt-based softenerSized by household use and hardness.
Taste or odorCarbon filterReplace cartridges on schedule.
Drinking water qualityReverse osmosis at one tapSmall tank under the sink.
SedimentSediment pre-filterProtects the softener.
Scale on a tankless unitSoftener ahead of the heaterReduces descaling.

What to know before buying

A few decisions shape the system.

  • Household sizeNumber of people and bathrooms.
  • Hardness20 to 22 grains as published by the city. We confirm with a test.
  • Space and drainA softener needs a drain and an outlet.
  • Discharge rulesCheck that your softener's discharge is allowed. Septic homes need extra care.
  • Salt and upkeepSalt refills and resin life.

Septic systems and softeners: brine discharge can affect a septic tank. Ask your septic service before you install.

Softener service and repair

Softeners fail in a few common ways. A brine tank can bridge, with a hard crust that blocks salt from dissolving. The resin can wear out after years, and the control valve can stick. If softened water comes back hard, check the salt level first.

Hard water gets through a softener when the bypass is open, the salt is out, or the resin is exhausted. We test water before and after to see which. If your hot water runs weak and a softener is installed, we also check the bypass and the resin.

Related work on your equipment is on our water heater repair and tankless water heater pages.

What decides the softener price

We give a clear price before work starts.

System sizeCapacity and number of tanks.
Plumbing changesBypass valves, drain line and electrical.
Filtration add-onsPre-filters and RO units.
LocationBasement with a floor drain is easy.
PermitPlumbing work may need a permit.

Call for your real number: (651) 946-0134.

Sizing a softener for 20 to 22 grains

A softener is sized by how much hardness it can remove between regenerations. A simple way to estimate demand is to multiply the number of people by the gallons each uses per day, and then by the hardness in grains. For four people using about 75 gallons each at 21 grains, that comes to roughly 6,300 grains of hardness a day.

A unit rated for 32,000 grains would need to regenerate about every five days at that load, while a smaller unit would regenerate more often. More frequent regeneration uses more salt and water. We size the unit so it regenerates on a reasonable schedule rather than every other night.

These numbers are an estimate. A water test at your tap gives the real hardness, and a look at your habits gives the real demand.

Water softener questions

The city lists total hardness at 370 mg/L as calcium carbonate, or 20 to 22 grains.

The hardness figure the city publishes is for the water as delivered to the tap, and it is 20 to 22 grains. Ask the city's Utilities Division at 651-450-4309 for current treatment details.

It is strongly worth it. See tankless water heater for descaling.

Yes, including control valves and resin.

Yes, including reverse osmosis.

Yes. See Rosemount and Eagan.

Ready to deal with hard water?

Call and tell us the household size and what the water is doing.

Call (651) 946-0134

Our service area around Inver Grove Heights

From the Mississippi River bluffs to Eagan, Mendota Heights, West St. Paul and Rosemount.

Call (651) 946-0134, open 24/7